12 Cores Fiber Optic Termination BoxModel No.:SY-1028BDescription
The equipment is used as a termination point for the feeder cable to connect with drop cable in FTTx communication network system.
The fiber splicing, splitting, distribution can be done in this box, and meanwhile it provides solid protection and management for the
TTx network building.
Total enclosed structure.
Material: PC+ABS,wet-proof,water-proof,dust-proof,anti-aging, protection level up to IP65.
Clamping for feeder cable and drop cable, fiber splicing, fixation, storage, distribution...etc all in one.
Cable,pigtails,patch cords are running through own path without disturbing each other, cassette type SC adaptor installation,
Distribution panel can be flipped up, feeder cable can be placed in a cup-joint way, easy for maintenance and installation.
Cabinet can be installed by the way of wall-mounted or poled-mounted, suitable for both indoor and outdoor uses.
1. Environmental requirement
2. Main technical datasheet
UPC return loss:≥50dB
APC return loss:≥60dB
Life of insertion and extraction:>1000 times
3. Thunder-proof technical datasheet
The grounding device is isolated with the cabinet, isolation resistance is less than2MΩ/500V(DC);
The withstand voltage between grounding device and cabinet is no less than 3000V(DC)/min, no puncture,no flashover.
Table 1 Model and configuration
|Model||Description||Size(Pic 1)||Max Capacity|
Drill 4 holes over the wall based on the size of the box,place the expansion bolt Φ7.5*40,place the box to match up the holes and use bolt to fasten.Accessories
1. Users' Manual*1.
3. Accessories Bag * 1.
4. Easy pole ring*2,M6*20mm Bolt*2(Option). For Further question about our Splice Box 12 Cores Fiber Optic Distribution Box,please feel free to leave me message.