DSB Drop Cable Splice Box
Description DSB series drop cable splice box is able to hold up to 1-2 subscribers drop cable. It is used as a termination point for the drop cable to connect with pigtail cable access to ONT in FTTH indoor application. It integrates fiber splice connection in one solid protection box.
So that the welding point is better protected, relative to the cold-connected products, can improve the optical properties of the connector, so that the effective connection The rate increased to 100%, to extend the service life of the product, reduce the cost of maintenance.
1. Fused point built-in thermal protection casing greatly improve the reliability of the product.
2. Continuation of the whole process, product success rate of 100% pass, greatly saving the construction time.
3. The welding of the cable can achieve high optical performance, the average insertion loss ≤-0.03dB, return loss ≥-60dB.
4. Products in the course of the use of environmental impact, no failure rate, long life, lower maintenance costs.
5. Tail-end fiber reinforced structure so that the cable tensile strength greater than 60N.
6. Simple and quick operation, the operator does not need professional skills.
7. melt box size (MM): 95 × 48 × 10
8. Product weight: 0.026KG
9. Product use: fiber to the home construction, fiber fast branch, welding protection tensile strength
Drop Cable Splice Box
Optical fiber junction box must pay attention to the quality of the port
Fiber distribution box when in use, the most easily damaged part is often its port, we all know, for this kind of products, often also is a closed shape, and when in use, is often used in cable to internal insert.
And at the time of insertion, often have no fixed a lot, so it often because of excessive insertion times, and affect the commercial, when a fiber distribution box problems when the commodity, it is very difficult to repair, so when the user in the purchase of this product, or pay attention to it in the port top quality performance.
For this point, often the user will have a discovery, if you are buying a brand product, often it is used for a long time, port still does not have what change, but if you are buying a small factory produced products, often it after use not long time, also the damaged goods will appear.
Scope of application
3.Ox2.0mm drop cable or 3.0mm cable
Fiber cladding diameter
Repeat uses circles